Iseries odbc driver download

Is this content inappropriate? Report this Document. Flag for inappropriate content. Download now. Save Save base-datos. Base Datos. Original Title: base-datos. Related titles. Click Browse. Over the years IBM i has proven to be extremely reliable, easy to use, inexpensive to maintain, as well as flexible and secure. Unwanted remote access, stolen credentials, and misused privileges threaten every organization.

Click New. It helps to avoid downtime during VIOS and firmware updates when migrating to other frames. Make connections and spot trends in your data. We continue to develop the leading testing technologies that drive progress through essential credentials in virtually every industry. There is a similar workaround for linux client? I'm using remmina 1. Most common are. If you encounter an issue while working with the App Identity and Access adapter, consider the following FAQ's and troubleshooting techniques.

Our IT management software solutions keep business running smoothly. Hired to perform an IBM i security assessment as part of the client's SOX compliance requirements, Briteskies reviewed the clients infrastructure and found vulnerabilities on the IBM i server which had potential to be exploited to gain unauthorized access. Select your profile and click Edit. As you develop your expertise, you will build prospecting, social selling skills and expand your social influence with a focus on client satisfaction.

Sub Links. Listed below are the most common errors with their solutions. The information technology products, expertise and service you need to make your business successful. Restore the security data and configuration data. This article focuses on solving some of the uncommon problems faced during the installation Ibm i access client solutions troubleshooting Changing the screen size for IBM Client Access and ACS sessions is easy!

Auth0 values simplicity, extensibility, and expertise enable security and application teams to make identity work for everyone in their organizations. If you find out that you cannot remember your email or password, we have solutions for you below. Follow the Procedure here. Powers of Ten takes us on an adventure in magnitudes. It controls your processing and makes it possible to run multiple applications in a single partition, but the art form is losing out to system defaults.

They co-create value-driven, evidence-based innovative solutions for clients, using their comprehensive knowledge of industry, business, and technology, in combination with their insights about how IBM capabilities will solve problems and develop growth opportunities.

Your title pretty much says it all. For the majority of them, however, betting big on IBM i has paid off. Access is the best solution for the segment between Excel spreadsheet and more sophisticated database solutions. Java 6.

IBM i Work Management Access is the most popular database in the world by servicing this segment extremely well. Explore API documentation, tutorials, code patterns, articles and more from experts in the industry. While this blog was written when the technology preview came out, the information here is applicable to using this product today.

Finally you don't have to use native app Verse or webclient. Work management is essential for establishing an efficient, run-time environment on IBM i. Is this the right approach? Keeping your internet browser up to date is important for maintaining your online security. The newer units do prompt for a password but the default is no password. Just click on through it and you can then add a password if you so choose.

Click here to download the Tera2 administrators's guide. Yes, but to use WOL on a zero client you would need 3rd party software, listed below are some sites for WOL utilities. Here are some examples WOL utility tools. Note: Teradici or 10ZiG has not tested these tools and is providing this list for reference only.

Make certain that the pool is set for four 4 monitors and the resolution is set at the highest setting. Changing these two parameters will adjust the VRAM high enough to support the four monitors. These devices may need to be bridged to the host rather than being locally terminated please see the document below for inforomation on how to bridge a USB device on a PCoIP zero client.

PCoIP zero clients support pre-session smart card authentication for sessions connected to VMware View virtual desktops that meet the system configuration. For deployments that meet these requirements, PCoIP zero clients can also read and process smart card information and allows SSO single.

Please click here to read the Teradici document regarding support for pre-session smart card authentication. Mounting instructions can be found HERE. Please email support 10zig. Sandisk USB drives are recognized as a basic drive rather than a USB removable and the program will not be able to see them. Restart the 10ZiG Manager Service to apply change. With the 10ZiG Manager, our Linux v9 9.

The manager now has the capability to automatically register an SRV record with a local Microsoft DNS server, assuming the user has the appropriate privileges. However, if the automatic SRV record creation fails, use the following instructions to manually add the record. This mitigates the need for the Manager server to poll IP addresses to discover new clients or refresh the status of existing clients. The UDP record is used by thin clients not connected via the Cloud Connector, usually on the same local network.

The following steps detail how to create this record type. Finally, click OK to create the new record. The process is similar to creating the UDP record except for a couple of key differences. The procedure is detailed as follows. Host offering this service: Enter the host name of the computer where the Cloud Connector has been installed.

The 10ZiG Manager communicates with the various thin clients on several network ports that will conflict with existing DHCP or Active Directory functionality; therefore, it is recommended that the Manager not be installed on computers that already host these services such as domain controllers. Tip: If you are unable to PXE boot from your 10ZiG Manager, run a command prompt and type in netstat -abp udp to find out what services are bound to your ports. No, always create a new template from the updated firmware.

Often times parameters may have changed in the new firmware that could become corrupt by applying an older template. To download the BOSmanager click here. To download the BOSmanager manual click here. If the thin client is on the network the 10ZiG Manager service is running it will displayed in the 10ZiG Manager console. Select Install if you do not see the firmware you are looking to use to update the firmware.

Highlight the firmware to install and select open. This process extracts the. Once the package has been extracted, the firmware will be display as below:. The update will show in the notification area at the bottom of the console. Once the firmware update is complete, the thin client will reboot. The 10ZiG Manager will now show the updated firmware. Go to the server tab and then Advanced on the left side and change the logging level at the bottom to debug and save settings. The manager should prompt you to you restart but if it does not, restart manually after this change.

Double click on the log ICON in the notification tray. The image below is the log view. Support techs will direct you where to send it. You can also grab the log file directly and attach it to an email to send to 10ZiG support.

The path to the file is at the bottom of the image above. This viewer provides various additional features like chat and file transfer. Note: Any other device that utilizes PXE booting will also default to these settings when booting.

No, the 10ZiG Manager communicates with the thin clients using remote procedure call RPC and Active Directory relies on remote procedure call RPC for replication between domain controllers thus resulting in a conflict if on the same server. To update if your image is lower than 9. Contact Tech Support for location and credentials to download updated image. For example: If the manager is at IP Most likely the name of the thin client has been changed to a name with a space in it - remove the space and it will show up in the manager with the correct name.

Network address translation NAT is the process of modifying IP address information in IP packet headers while in transit across a traffic routing device. If you use the cloud connector you will not need to NAT. Check to see if the. The 10ZiG Manager looks for a specific naming convention when it starts the firmware option, if that naming convention does not match up to what it requires it will fail. If this is the case, rename the file back to the original name and try the firmware update again.

NullReferenceException: Object reference not set to an instance of an object. The sysprep settings are stored within the database. However, if you need to remove previously saved settings:. Further information on this topic will be posted as made available and can be requested by contacting 10ZiG Technical Support.

To avoid this issue, do not upgrade to ESX 4. PCoIP protocol is recommended for dual monitors. If using RDP protocol please refer to this article.

RDP presents the printer through the printer redirection feature at the same time the USB device is presented by Virtual Desktop Manager to the virtual desktop. VMware View 5 is designed for security and by default requires a secure https connection using a preinstalled certificate.

If you are not using an https or secure connection to your VMware View Server then follow these steps. In the past, you could use the default self-signed certificate that is generated in the absence of a CA-signed certificate. With View 5. Self-signed certificates are shown as invalid in View Administrator.

Linux is different than Windows in that you must manually install the certificate from a USB thumb drive or via the Manager template will also carry the certificate once it is installed. Copy the certificates in. Place the thumb drive in the thin client. Once the thin client detects the USB thumb drive and sees the certificates it will present the following menu:.

Once the certificates are uploaded you can see them by taking the option for settings as seen below:. From the certificate option you can view the imported certificates and highlight then select Show for certificate details. Change to view source of Base Certificates which have been preinstalled. Many of the common certificates are installed but if the required base certificate is one that has not been installed it must be installed using the USB method. Time to change the way we think!

From VMware 2. Since Linux still sees the device natively changes must be made in the USB redirection on the thin client. Please NOTE that the downloaded programs that come with the drivers for the cameras such as Logitech and Microsoft packages query the USB for the camera, so they do not work! You can test the webcam using www. Windows Aero is the graphical user interface and the default theme in most editions of Windows Vista and Windows 7 operating systems released by Microsoft.

This user interface is very resource intensive, change the desktop theme to the 10ZiG Technology theme which does not use Windows Aero. Right click on the desktop and go to personalize - set the theme to 10ZiG Technology. Click here to download the Gemalto Driver. Restarting or logging off and back on to Windows 7 does not resolve the issue. This temp profile issue rises because of a registry key problem. Select Start - Run - gpedit.

Select OK and reboot the thin client. Yes it will work. The problem that still exists is that when you do a warm boot restart the fourth monitor does not come up, however if you power down completely and then do a cold boot or a normal power up the fourth monitor will initialize.

Either disable write protection or make sure you commit changes after updates have taken place or once it reboots they will be gone. Import the. If the touch screen does not require a driver, it will not work in our build of WES 7 even if the touch screen works in Windows 7. There is a component called Tablet PC support in Windows 7 and one of its functions is to provide touch screen support.

Once we have a better understanding as to which Touch Screens will work with WES 7 we will provide a list of recommended touch screens. While logging off hold the right shift key and continually tap the left shift key until you are presented with a logon box. Log on as administrator. The reason why this occurs is that domain and PC exchange a secret key behind the scenes and the default time limit on this exchange is 30 days.

When EWF is enabled and the PC gets rebooted and the change that has occurred is not saved in the registry. The work around for this is:. Click Here for step by step instructions on how to lock down your Embedded Windows 8 thin client.

Once you have performed the necessary registry edit explained in the pdf, the following video demonstrates the lock down process. The issue is the USB port. The scanner will work on USB ports lower than 2. The on-board video chip may handle a wide screen but maximum resolution is based both monitor and video chip.

Contact sales to find out which models support higher resolutions. There are a couple of options and on some models you can purchase a PCI video card that handles wide screen 10ZiG Technology sells PCI video cards that can do wide screen. From a shell type dmidecode more - the top of the file will include the BIOS version - example below:.

You must install the Bluetooth a certain way or it will not work!! Bluetooth Wireless Scanner. Mounting Bracket Guide. The patch that fixes daylight saving time is below. Sign on to the thin client as administrator. After downloading the zip file make certain you extract the file and save it as an exe file. After running the program make certain changes are committed or they will be lost. Daylight Saving Time Fix.

When trying to use a second monitor the DVI connected one will be the primary and the VGA connected monitor will be the extended. To disable the startup of the tray application altogether, as well as the ability to disable the context menu and hide the EWF tray ICON follow the steps below:. In the Windows Registry: Make certain to either disable EWF prior to doing the following or commit the changes afterwards. You have to log in as that user so the hive is loaded for that user and you have to add the registry hacks.

Other devices in this table are supported by high-level device redirection mechanisms. Devices not listed in the table will be processed by using RemoteFX USB redirection; they may work, but are not considered officially supported. Click on Commit changes.

Rigth click on the and select commit changes. Modify the security on this key and the three subkeys. Right click on each key, then click on permissions on the menu.

Click on "Advanced" for special permissions. Click on "Edit" to the the Users group. Click the checkbox to enable the "Set Value" and "Create Subkey" security settings.

Reset the CMOS - with the power off, remove the cover and find the battery. Next to the battery you will find a yellow or orange jumper. Move it from the middle and end to the middle and opposite end for approximately 10 seconds then move back to the original position. You may get this with bad memory. Always answer NO, shut down unit, put correct memory in unit and it will come up fine. The XPe thin client image is built with a blank administrator password and RDP requires a password and will not connect without one.

Copy the rhttpaa. When this box is unchecked, it does not use remote HTTP when connecting. Note : If the DefaultPassword registry entry does not exist, Windows XP automatically changes the value of the AutoAdminLogonregistry key from 1 true to 0 false to turn off the AutoAdminLogon feature after the computer is restarted.

If there is no AutoAdminLogon entry, create the entry. To do this, follow these steps:. In all cases if EWF is enabled changes must be commited before rebooting - if EWF is not enabled then no saves are required. When installing a printer, windows may prompt you for the installation CD. CAB file. If write protected please commit changes!

The Ramdisk driver we use for this guide is almost identical and based on the Microsoft sample driver described here: Microsoft KB At this point you have successfuly installed and configured a RAM Disk drive on your system. They are also lost if power is lost, computer rebooted, etc. You might want to reboot and copy some files to your new RAM disk from within Windows Explorer to ensure it's operating properly. Depending on your OS, you might be prompted to reboot after the drive is installed.

Keep in mind that the size of your Ramdisk is substracted from the available RAM, so don't use any wild values. If the XPe thin client has the 10ZiG agent installed on the image, it needs to be disabled in the registry. It is the auto USB redirection caused by the Citrix desktop appliance lock, to get round it you have to add a registry key:. This stops it from attempting to redirect the wireless device to the Citrix session and restarting the thin client.

Newer images will have the current certificate in them, however, customers who have the older images and want to update Flash or Shockwave will have an issue - the browser will show the.

Both certificates are needed. To install unzip the files and double click on each certificate and follow the prompts. Oracle Java recently changed their Certificate Authority resulting in an message that the certificate cannot be verified. Please click here for the 10ZiG Technology security vulnerability statement. For more information please, contact support. The USB redirection feature that can be installed with Horizon Agent does not support webcam redirection.